| |
* * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * *
|
|
|
The galvanized frame as it came from Advanced Frame Works. |
| Another view of the frame. |
|
|
The tubular skid-plate (shown without the access cover), primed and ready for the chassis black paint. |
| The tubular skid-plate (shown with the access cover), primed and ready for paint too! |
|
|
Spraying on the final coat of chassis black paint onto the AFW frame. |
| The final frame (upside down) from the back. |
|
|
The final frame (still upside down) from the side. |
| A close-up of the integrated cross-member / bumper with the 2" hitch receiver. |
|
|
A close-up of the tire carrier. Notice the 2" hitch receiver at the top. A very cool feature for accessory quick change! |
| Motor mount brackets installed - the frame cross-bar had to be shortened 1/2-inch to fit inside the new frame. |
|
|
The skidplate (shown without the access cover) painted and installed on the frame. |
| The skidplate (shown with the access cover) painted and installed on the frame. |
|
